http://www.morfon.com/inkjet-industry-analysis/
Teach a trick on ordinary paper can print beautiful photos – photo printers, office equipment – office equipment industry
As jet printer ink, price is not too expensive, and in the printed image can get very realistic effects, but also very convenient in operation, many individual users or personal users are willing to choose the inkjet printer to print materials.
However, the use of images output printer inkjet, if we use our common printing paper to the output, the output of the real images tend to be much less effective, or even effect of the output is hard to see, in order to improve the output effects can use a professional paper photo printing for export, but prices print photo paper for the average consumer is often difficult to accept.
Then we have no choice but to use normal printing paper in the output the conditions for inkjet printers in the output image to produce better results printing? After much examination I found with a simple and feasible, and I hope this method will give the impression of running to help users.
1. Why print on plain paper in good
Reason for common printing paper for the output image can not produce good printing results, especially since the performance of the printing paper normal absorption of water is not very good, and these plain and photo paper, professional, compared with many thin. Thus, inkjet printers ink ink After spraying the normal printing paper, ink can not be absorbed in time, when the output of the image, we see in this time of paper print with a very wet feeling, especially in places of intense color, ink color can even go into the back of a fine print paper paper that may lead to deformation of the area, while the local area office of the ink color, each penetration phenomenon does not occur too, eventually led to the ideal can not get out of the picture.
2. Methods based on the above analysis, I think that while the ways to improve printing paper in general, the rate of absorption of the ink can improve inkjet output, the author is achieved through the following methods: use normal printing paper, before finding someone to be a common household iron if the iron with the steam feature, you must first turn off the steam function, and then the same ironing clothes, Ironing used consistently normal printing paper a few seconds, this will ensure a smoother print job, so I feel the impression paper a little bit of fever, and immediately went to the printer, and run the print command, such as temperature of the printing surface of paper, spray ink to the surface in a very short period of time can quickly evaporate in drying to avoid the phenomenon of mutual penetration of the ink, which should make the final output to the image feel more crisp and clear, ensuring the improvement of printing.
3. Note
, Of course, the use this method, be sure to pay attention to the control of printing paper is heated to a temperature of size, usually iron the role of temperature near 70, the temperature of the surface of the paper in 1 minute or so is not expected to drop, If the paper surface of the plate at a temperature too high can cause hardening crisp printed paper, resulting in a slight deformation of the paper, changing the shape of the paper used for printing of course, is not satisfactory and the effect of printing jet, if the paper found that after using the iron to the output image, ink color of color words appeared on the surface of the paper should be appropriate to reduce the temperature a little more.
About the Author
I am an expert from disposablemedicalsuppliers.com, while we provides the quality product, such as Yoga Netipot , Yoga Neti Pot, disposable medical suppliers,and more.
EFI Jetrion 4000 UV Inkjet System
Printer News